Salim Export
Santacruz East, Mumbai, Maharashtra
GST No. 27AEKPG8204N1Z6
TrustSEAL Verified
Call 0804607860289% Response Rate
SEND EMAIL
Established in 1971, Microfinish group is a leading manufacturer of ball valves, bellows sealed globe valves, process pumps, gate globe and check valves, pneumatic actuator and automated units.
Microfinish is renowned for quality products, and reliable service to the industry. A wealth of experience has enabled Microfinish to become a prominent supplier of wide range of products throughout the world.
In 1994 Microfinish was among the first companies in INDIA to receive the ISO 9001 certificate. In February 1999, Microfinish ball valves had completed an essential step by gaining the API 6D certificate (6D-0301 monogram), and becoming an active player in the Oil and Gas market.
In 2002, Microfinish ball valves were certified to PED 97/23/EC (currently PED 2014/68/EU), a step which permits Microfinish to stamp the CE quality mark on its valves, and to place ball valves in the EU market. In 2009 Microfinish ball valves were certified for use in a SIL 3 loop as per IEC 61508-2.
Throughout the years Microfinish R&D team gave a special attention to minimizing fugitive emissions from valve’s stem dynamic seal; with the introduction of the advanced ‘Cup-and-Cone’ stem seal arrangement certified to TA-Luft in 2010; followed by a successful test result as per the ISO 15848-1 testing protocol in 2014, and the last achievement of gaining the API 641 certificate in 2018.
Microfinish has expertise in valve automation technology, and can offer complete automated systems. A wide range of actuators, control units, and accessories enables Microfinish to be ‘one-stop-shop’ for automated valve systems.
Microfinish valves are available in a verity of automation packages that include:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Material | WCB |
| Brand | Microfinish |
| End Connection Type | Flanged |
| Unit Sold Till Date | 1500 |
Microfinish floating ball valves are available in a flanged type one piece side entry design; a two piece mainly ASME flange type design, and three piece with a variety of end connections such as threaded, socket weld, butt-weld, and extended butt-weld ends for in-line welding.
All configurations are available in reduced bore and full bore designs, in sizes from 1/2 inch (DN15) and up to 10 inch (DN250), and pressure classes from ASME 150 to 2500 (size dependent).
Product Details:
| Material | Carbon Steel |
| Size | 15 to 200 mm |
| Brand | Microfinish |
| Pressure | 150 and 300 bar |
Floating Ball Valve Range
Microfinish floating ball valves are available in a flanged type one piece side entry design; a two piece mainly ASME flange type design, and three piece with a variety of end connections such as threaded, socket weld, butt-weld, and extended butt-weld ends for in-line welding.
All configurations are available in reduced bore and full bore designs, in sizes from 1/2 inch (DN15) and up to 10 inch (DN250), and pressure classes from ASME 150 to 2500 (size dependent).
Applicable standards
| Design standard | ASME B16.34, ISO 17292, API 6D, API 608 |
| Testing standard | API 598, EN 12266-1, ASME B16.34, API 6D, ISO 5208 |
| Fugitive emission | TA-Luft, ISO 15848-1, API 641 |
| Flange standard | ASME B16.5 |
| Weld ends | ASME B16.25 |
| Fire safe testing | API 607, API 6FA, ISO 10497 |
| Sour gas service | NACE MR0175 / ISO 15156 and NACE MR0103 / ISO17945 |
| Documentation | EN 10204 type2.2 (default) / 3.1/ 3.2 |
Product Details:
| Minimum Order Quantity | 1 Piece |
| Valve Size | 2 inch |
| Material | Stainless Steel |
| Usage/Application | Air |
| Pressure | High Pressure |
| Unit Sold Till Date | 800 |
Additional Information:
Product Details:
| Material | Carbon steel |
| Usage/Application | Industrial |
| Pressure | Medium Pressure |
| Valve Size | 15-200mm |
| Connector Type | FLANGE SCREWED |
| Brand | Microfinish |
Microfinish Screwed Ball Valve to the patrons. These products are obtained from trusted manufacturers, who use premium quality raw material in the production process. We offer these products in several specifications to our customers. Further, our quality inspectors check the quality of every product on numerous parameters before final delivery.
Product Details:
| Material | WCB |
| Brand | Microfinish |
| Usage/Application | Industrial |
| Pressure | Medium Pressure |
| Connector Type | Screwed |
Customers can avail from us a wide range of Microfinish SS Ball Valve Valve various sizes and other specifications. We source these products from trustworthy vendors, who use the optimum quality raw material in the production process. Further, these products are manufactured in accordance with the global quality standards. These products are extensively used in engineering related industries
Product Details:
| Material | Carbon Steel |
| Brand | Microfinish |
We are involved in offering a wide range of Microfinish Forged Three Piece Ball Valve to the clients. Sourced from eminent vendors, these products are demanded in construction and engineering related industries. Our products are demanded for their perfect finish, dimensional accuracy, dimensional accuracy and sturdy construction. We offer these products in various shapes and sizes to our clients.