Salim Export
Santacruz East, Mumbai, Maharashtra
GST No. 27AEKPG8204N1Z6
TrustSEAL Verified
Call 0804607860283% Response Rate
SEND EMAIL
Product Details:
| Model Name/Number | Y TYPE |
| Material | CS/FCS/ALLOY |
| Usage/Application | STEAM/THERMIC FLUID/CHECMICAL |
| Design | Y TYPE GLOBE |
| Body Material | CS/FCS/ALLOY |
| Pressure | High Pressure |
| Brand | KSB |
By following industrial quality guidelines, we are indulged in providing a broad range of Ksb Y Type Alloy Steel Globe Valve. Our dedicated professionals, who hold huge industrial knowledge, manufacture the whole range of these valves by making use of unmatched quality raw materials and superior techniques. Before being delivered at clients end, these valves are examined properly on varied parameters to ensure their durability and high quality.
Globe Valves
Globe Valves to ANSI/ASME with Gland Packing
SICCA 900-2500 GLC
Main applications
Boiler feed applications
Fossil-fuelled power stations
Petrochemical industry
Pipelines and tank farms
Refineries
Process engineering
Fluids handled
Steam
Fluids containing gas
Condensate
Oil
Feed water
Vacuum
Operating data
Operating properties
Characteristic Value
Nominal pressure Class 900 - 2500
Nominal size [inch] NPS 2 - 8
Max. permissible pressure [bar] 431
Max. permissible pressure [psi] 6250
Min. permissible temperature [°C] ≥ 0
Max. permissible temperature [°C] ≤ +650
Min. permissible temperature [°F] ≥ 0
Max. permissible temperature [°F] ≤ +1200
Selection as per pressure/temperature ratings (??? Page 5)
Body materials
Overview of available materials
Material Temperature limit
[°C] [°F]
ASTM A216 WCB ≤ 425 ≤ 800
ASTM A216 WCC ≤ 425 ≤ 800
ASTM A217 WC6 ≤ 593 ≤ 1100
ASTM A217 WC9 ≤ 593 ≤ 1100
ASTM A217 C12A ≤ 650 ≤ 1200
Design details
Design
Globe valve to ASME B16.34
Cast steel body
Straight-way Y-valve
Seat/disc interface made of wear-resistant and corrosionproof
Stellite
Pressure seal design
Outside screw
Outside yoke
Non-rotating stem
Rising stem
Non-rising handwheel
Graphite gaskets and graphite packing with braided
packing end rings offering wiping action
Butt weld ends
"Special Class" version
The valves satisfy the safety requirements of Annex I of
the European Pressure Equipment Directive 2014/68/EU
(PED) for fluids in Groups 1 and 2.
Only for Standard Class version
The valves meet the requirements of the Indian Boiler
Regulations 1950.
Variants
Position indicator
Locking device
Bypass
Stem protecting tube
Actuator can be retrofitted directly after handwheel has
been removed.
Electric actuators
Gearboxes
Limit switches
Drain plug
Drain branch
Product benefits
Long service life and high functional reliability
– Two-piece self-aligning gland follower ensures even
compression of packing rings.
– Inconel-reinforced braided packing end rings offer
smooth wiping action and prevent extrusion of
graphite.
– Stellite 6 hard-faced body seat ensures high wear
resistance.
– Burnished stem and smooth stuffing box surfaces
extend the service life of the gland packing.
– Rotating, self-aligning valve disc ensures reliable
function.
– Low actuating torque due to rolling e
Ksb Y Type Alloy Steel Globe Valve
Ksb Y Type Alloy Steel Globe Valve
Ksb Y Type Alloy Steel Globe Valve
KSB VALVE
KSB VALVE
KSB VALVE
KSB VALVE
KSB VALVE
KSB VALVE
KSB VALVE
KSB VALVE
Additional Information:
Product Details:
| Material | WCB |
| Usage/Application | Industrial |
| Body Material | Alloy Steel |
| Pressure | High Pressure |
| Valve Size | 25-200 mm |
| Brand | KSB |
Product Details:
| Minimum Order Quantity | 1 Piece |
| Size | 4 inch |
| Material | CS/FCS/ALLOY |
| Brand | KSB |
| Usage/Application | STEAM/THERMIC FLUID/CHECMICA |
| Pressure | High Pressure |
| Valve Size | 15 TO 700MM |
| Country of Origin | Made in India |
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| End Connection Type | FLANGE/BUTT WELD |
| Brand | KSB |
| Application | STEAM,WATER |
| Material | WCB |
| Usage/Application | Industrial |
| Unit Sold Till Date | 4000 |
Being amongst the leading organizations, we are highly affianced in presenting a superb quality array of KSB Cast Steel Gate Valve. Manufactured in adherence with predefined global quality norms, the provided valves are strictly checked against various quality parameters before the final delivery. Apart from this,
Gate Valves
Gate Valves to ANSI/ASME with Bolted Bonnet
ECOLINE GTC 150-600
Operating data
Operating properties
Characteristic Value
Nominal pressure Class 150 - 600
Nominal size [inch] NPS 2 - 24
Max. permissible pressure [bar] 106
Max. permissible pressure [psi] 1500
Min. permissible temperature [°C] ≥ 0
Min. permissible temperature [°F] ≥ 32
Max. permissible temperature [°C] ≤ +649
Max. permissible temperature [°F] ≤ +1200
Temperatures < 0 °C on request
Selection as per pressure/temperature ratings (ð Page 6)
Valve body materials
Overview of available materials
Material Temperature limit
[°C] [°F]
ASTM A216 WCB ≤ 427 ≤ 800
ASTM A217 WC6 ≤ 593 ≤ 1100
ASTM A217 WC9 ≤ 593 ≤ 1100
ASTM A217 C5 ≤ 649 ≤ 1200
ASTM A217 C12 ≤ 649 ≤ 1200
ASTM A352 LCB ≤ 343 ≤ 650
ASTM A352 LCC ≤ 343 ≤ 650
ASTM A351 CF8 ≤ 427 ≤ 800
ASTM A351 CF8M ≤ 427 ≤ 800
Other materials on request.
Design details
Design
Gate valve to API 600-2009
Tested to API 598
Body made of cast steel or stainless steel
Flexible wedge
Bolted bonnet
Non-rotating stem
Non-rising handwheel
Stem sealed by gland packing
Two-piece self-aligning gland follower
Die-moulded graphite gland packing with braided
graphite packing end rings
Stainless steel/graphite gaskets
Stem with burnished shank
Stem nut made of nickel steel
Outside screw
Sealing surfaces made of wear and corrosion resistant
materials
Back seat
Hardened back seat bush
Outside yoke
Yoke head suitable for mounting electric and pneumatic
actuators (DIN ISO 5210)
Variants
Limit switch(es)
Locking device
Stem protecting tube
Stem protecting tube with position indicator
Drain plug
Hard-faced back seat
Pressure relief arrangement
Bypass
Free stem end and top flange to ISO 5210
Gearboxes
Electric actuators
Gate Valves
Gate Valves to ANSI/ASME with Bolted Bonnet
5 ECOLINE GTC 150-600 7362.11/06-EN
Version in compliance with TA-Luft (German Clean Air Act)
to VDI 2440 for temperatures up to 400 °C
Non-destructive testing, e.g. radiographic testing
Inspections to technical codes such as AD2000 or IBR
Gate valve to API 600-2015
NACE standard
Other flanged end designs or butt weld ends to
ASME B16.25
Version in compliance with API 624 fugitive emission
requirements.
Larger nominal sizes and other variants on request
Product benefits
??? Stem with burnished shank for long service life and high
functional reliability of the gland packing
KSB VALVE
KSB VALVE
KSB VALVE
KSB VALVE
KSB VALVE
KSB VALVE
KSB VALVE
KSB VALVE
Product Details:
| Size | 15 to 300mm |
| Material | Cast steel |
| Usage/Application | Industrial |
| Pressure | High Pressure |
| Valve Size | 50-200 mm |
| Brand | KSB |
| End Connection Type | Flanged |
Enriched with enormous industrial knowledge and experience, we are occupied in providing a vast gamut of KSB High Pressure Gate Valve. Offered valves are accurately designed and developed following industrial standards and by using high quality raw materials. Our provided valves are widely appreciated in the market for their sturdiness and finest quality. Moreover, these valves are available in diverse sizes and dimensions as per the clients specifications.
KSB High Pressure Gate ValveKSB High Pressure Gate Valve
KSB High Pressure Gate Valve
KSB VALVE
KSB VALVE
KSB VALVE
KSB VALVE
KSB VALVE
KSB VALVE
Product Details:
| Brand | KSB |
| End Connection | FLANGE |
| Design Type | STANDARD |
| Material | WCB |
| Size | 50-300 mm |
| Usage/Application | STEAM |
Check Valves and Strainers
Swing Check Valves to ANSI/ASME
SICCA 150-600 SCC
Main applications
Mining
Chemical industry
Descaling units
Domestic water supply
Boiler feed applications
Boiler recirculation
Fossil-fuelled power stations
Cooling circuits
Pulp and paper industry
Petrochemical industry
Pharmaceutical industry
Pipelines and tank farms
Refineries
Rainwater harvesting
Process engineering
Heat recovery systems
Hot-water heating systems
Water extraction
Water supply systems
Sugar industry
Fluids handled
??? Service water
Steam
Fluids containing gas
Gas
High-temperature hot water
Heating water
Condensate
Cooling water
Fire-fighting water
Volatile fluids
Fluids containing mineral oils
Oil
Lubricants
Grey water
Feed water
Thermal oil
Wash water
Operating data
Operating properties
Characteristic Value
Nominal pressure Class 150 - 600
Nominal size [inch] NPS 2 - 24
Max. permissible pressure [bar] 103
Max. permissible pressure [psi] 1500
Min. permissible temperature [°C] ≥ 0
Max. permissible temperature [°C] ≤ +593
Min. permissible temperature [°F] ≥ 0
Max. permissible temperature [°F] ≤ +1100
Selection as per pressure/temperature ratings (??? Page 6)
Body materials
Overview of available materials
Material Temperature limit
[°C] [°F]
ASTM A216 WCB ≤ 425 ≤ 800
ASTM A217 WC6 ≤ 593 ≤ 1100
ASTM A351 CF8 ≤ 537 ≤ 1000
ASTM A351 CF8M ≤ 537 ≤ 1000
Design details
Design
Swing check valve to BS 1868
Design to API 594 (type B)
Cast steel body
Hard-faced seat/disc interface (13 % chrome steel/Stellite)
Bolted cover
Outside confined cover gasket
Seat ring welded into body
Internally mounted hinge pin up to 12 inches
Self-aligning free-floating and non-rotating valve disc
Flanged ends
Butt weld ends
The valves satisfy the safety requirements of Annex I of
the European Pressure Equipment Directive 2014/68/EU
(PED) for fluids in Groups 1 and 2.
??? The valves meet the requirements of the Indian Boiler
Regulations 1950
Product benefits
KSB VALVES
KSB VALVES
KSB VALVES
Product Details:
| Material | WCB |
| Size | 15 TO 700MM |
| Usage/Application | Industrial |
| Connector Type | Flanged End |
| Brand | KSB |
| Connection Type | Flanged End |
Product Details:
| Minimum Order Quantity | 1 Piece |
| Material | ALLOY |
| Valve Size | 1 inch |
| Brand | KSB |
| Pressure | 800 TO 2500 |
| Construction | A105, F22, F11, F91, CF8, CF8M |
| Media | STEAM |
| End Connection | FLANGE |
| Design Type | LIFT TYPE |
| Certification | IBR, CE, EIL, ISI |
| Unit Sold Till Date | 1200 |
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Model Name/Number | Y TYPE |
| Design | STANDARD |
| Usage/Application | STEAM/THERMIC FLUID/CHEMICAL |
| Body Material | CS/FCS/ALLOY |
| Brand | KSB |
| Pressure | 660 kg/cm2 |
We are highly dedicated to providing the finest quality assortment of KSB Ksb Y Type Globe Valve to our customers. Offered valves are precisely designed and manufactured with the use of superb quality basic materials and modern techniques under the guidance of our trained professionals. Strictly checked against various parameters to maintain their quality, our provided valves are delivered by us within the assured period of time.
KSB VALVE
KSB VALVE
KSB VALVE
KSB VALVE
KSB VALVE
KSB VALVE
Additional Information:
Product Details:
| Brand | KSB |
| Usage/Application | Industrial |
| Valve Size | 15MM TO 50MM |
| Model Name/Number | FORGED GATE |
| Material | ALLOY |
| End Connection Type | Socket Weld |
| Pressure | 200-250 Bar |
Product Details:
| Minimum Order Quantity | 1 Unit |
| Size | 50-700 mm |
| Brand | KSB |
| Material | WCB, WC6, WC9 |
| Pressure | 400-450 Bar |
| Temperature | -10 to 550 Degree C |
| Number Of Ways | 2 Way |
| Unit Sold Till Date | 2100 |
| Units Sold Till Date | 2500 |
KSB PRESSURE SEAL Gate Valves
Gate Valves with Pressure Seal Bonnet to ANSI/
ASME
SICCA 900-3600 GTC
Main applications
Boiler feed applications
Fossil-fuelled power stations
Petrochemical industry
Pipelines and tank farms
Refineries
Process engineering
Fluids handled
Steam
Fluids containing gas
Gas
High-temperature hot water
Feed water
Operating data
Operating properties
Characteristic Value
Nominal pressure Class 900 - 3600
Nominal size [inch] NPS 2 - 28
Max. permissible pressure [bar] 620
Max. permissible pressure [psi] 9000
Min. permissible temperature [°C] ≥ 0
Max. permissible temperature [°C] ≤ +650
Min. permissible temperature [°F] ≥ 0
Max. permissible temperature [°F] ≤ +1200
Selection as per pressure/temperature ratings Page 5)
Body materials
Overview of available materials
Material Temperature limit
[°C] [°F]
ASTM A216 WCB ≤ 425 ≤ 800
ASTM A216 WCC ≤ 425 ≤ 800
ASTM A217 WC6 ≤ 593 ≤ 1100
ASTM A217 WC9 ≤ 593 ≤ 1100
ASTM A217 C12A ≤ 650 ≤ 1200
Design details
Design
Gate valve to ASME B16.34
Cast steel body
Seat/disc interface made of wear-resistant and corrosionproof
Stellite
Pressure seal design
Outside screw
Outside yoke
Non-rotating stem
Rising stem
Non-rising handwheel
Split wedge
Reduced bore
Internally balanced wedge
Internal pressure relief arrangement
Butt weld ends
"Special Class" version
The valves satisfy the safety requirements of Annex I of
the European Pressure Equipment Directive 2014/68/EU
(PED) for fluids in Groups 1 and 2.
Only for Standard Class version
The valves meet the requirements of the Indian Boiler
Regulations 1950.
Variants
Position indicator
Locking device
Bypass
Stem protecting tube
Actuator can be retrofitted directly after handwheel has
been removed.
Electric actuators
Gearboxes
Limit switches
Drain plug
Drain branch
Full bore
Parallel slide double disc gate valve
Other pressure relief arrangement
Gate Valves
Gate Valves with Pressure Seal Bonnet to ANSI/ASME
SICCA 900-3600 GTC 5
Product benefits
Long service life and high functional reliability
– Two-piece self-aligning gland follower ensures even
compression of packing rings.
– Inconel-reinforced braided packing end rings offer
smooth wiping action and prevent extrusion of
graphite.
– Stellite 6 hard-faced body seat ensures high wear
resistance.
– Burnished stem and smooth stuffing box surfaces
extend the service life of the gland packing.
– Low actuating torque due to rolling element bearing.
– Stop nut prevents jamming of the wedge assembly in
the seat.
Additional features ensure safe sealing to atmosphere:
– Additional safety and blow-out protection by
standard back seat.
– Die-formed endless graphite packing rings reliably
seal the stem passage.
Reliable, tight shut-off
– Perfect contact at seat/wedge interface ensures tight
shut-off.
– Self-aligning split wedge ensures tight shut-off.
Product Details:
| Minimum Order Quantity | 1 Piece |
| Brand | KSB |
| Material | ALLOY |
| Valve Size | 15MM TO 50MM |
| Design Type | LIFT TYPE |
| Pressure | 800 TO 1500 |
| Media | STEAM |
| End Connection | Socket Weld |
| Certification | CE, IBR, EIL |
| Unit Sold Till Date | 1200 |
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Design | FCS SOCKET WELD END |
| Body Material | Alloy Steel |
| Usage/Application | Steam |
| Size | 15 MM TO 50MM |
| Model Name/Number | KSB GORGED GATE VALVE |
| Material | FORGED CAST STEEL, F22, F11, F91 |
| Brand | KSB |
| Driving Mode | Manual |
| Valve Design | STRAIGHT PATTERN |
| Valve Type | STRAIGHT |
| Testing Standard | HIGH PRESSURE |
| Place Of Origin | INDIA |
| Certification | IBR |
| Class Rating | 800-4500 CLASS |
| Coated | EPOXY |
| Sizes And Class Rating | 800 TO 4500 CLASS |
| Color | BLACK |
| Corrosion Resistance | YES |
| Trim Form | ST6 |
| I Deal In | New Only |
| Ends | SOCKET WELD |
| Grade | A105, F22, F11, F91 |
| Media | STEAM |
| Number Of Handles | ONE |
| Operating Mode | WHEEL |
| Operation | MANUAL |
| Packaging Type | CARTON, GUNY BAG, WOODEN BOX |
| Power | WHEEL OPERATED |
| Pressure | 800-4500 CLASS |
| Socket Weld Class | 800 CLASS |
| Stem | SS |
| Working Pressure | 60KG TO 300KG |
| Country of Origin | Made in India |
Additional Information: