UKL UNI KLINGER VALVE

Product Details:

UKL PISTON VALVE:-

THE PISTON VALVE principle is a KLINGER idea. One of

many ideas which has achieved world-wide recognition.

Continuously modified and matched to modern requirement, the

piston Valve has provided itself by the millions throughout the

world. Today we can say with pride that our group is worlds

largest manufacturer of valves, based on this design principle.

KLINGER Piston valve performance is backed by central R & D

of KLINGER at Switzerland.

The shut off assembly comprises of a stainless steel piston, two

resilient valve rings and a ferrous metal lantern bush. The sealing

consists of the cylindrical surface of the piston and the

corresponding inner surface area of the sealing rings. This

provides a very large sealing compared with globe valves with

conventional design- one of the reasons for the Piston valves

excellent seal.

The valve Rings are the heart of the piston valve. They are

made from KXGT, a material specially developed and

exclusively used for the manufacture of valve ring. KXGT

consists essentially of asbestos, a high quality elastomer and

graphite. KLINGER valve rings are not merely surface graphited;

the graphite content extends throughout the ring. For this reason

its outstanding self lubricating properties are retained throughout

the rings entire service life. KLINGER valve rings are resilient,

accurately dimensioned and in consequence of their good

recovery characteristics have excellent form retention and long

service life. KLINGER valve rings are resistant to water, steam,

oils, solvents and wide range of other media. KLINGER valve

rings can be used for more than 230 listed fluid media.

FEATURES:-

Seatless and Gland less valve.

Economic, easy to service.

No erosion of sealing surface.

Saves Energy, environment friendly.

Maintenance free.

Compensation for thermal expansion with use of

Belleville washer.

Leak-tight across ports and to atmosphere.

MATERIAL OF CONSTRUCTION:-

ASTM A216 Gr. WCB

ASTM A351 Gr.CF8M (On Request )

APPLICATIONS:-

Steam, Thermic fluids, Acids, Gases, vacuum and other critical

media.

Piston Valve

KVN 65- 200

ON REQUEST:-

IBR/Non-IBR

MOC : Cast Stainless / Alloy Steel

Valve with extended spindle.

Valve with Heating Jacket

Pneumatic / Electrical Actuator

AVAILABLE SIZES:-

65,80,100,125,150,200 NB

[65NB and 125 NB NB available in DIN

Overall length only]

INSTALLATION:-

Preferred direction is as per arrow,

however this valve is a Bi Directional

Valve. This valve can be installed in any

position without any adverse effect on

performance, seal ability or flow.

Due to soft sealing principle it is advisable

to install a strainer upstream of the valve to

avoid damage to the rings caused by weld

slag, metal and other solid impurities.Other Details:UKL Piston Valve is basically Seat less and Glandless valve and by virtue of its design can replace both, the conventional type of Gate and Globe valves, with distinct advantages over them. The Klinger Piston valve works on the principle of Resilient rings in conjunction with a Metallic Stainless Steel Piston, that moves vertically between the rings, giving a Seal that is both effective as well as Durable. This sealing system gives a bubble tight shut off, equivalent if not superior to Class VI leak standards.The Sealing rings are the heart of the valves, are available in Non Asbestos

Product Details:

Other Details:

UKL High Pressure Gate Valve are manufactured to the latest International designs, using the latest, State of the Art technology and a strict quality control system. These valves are exceptionally Sturdy, Rugged and Durable. They are designed for a tight Seal, ease of operation with inbuilt Quality and Integrity for a long service life

 

Product Details:

We are offering Klinger Piston Valve to our client.

Product Details:

UKL PISTON VALVE:-THE PISTON VALVE principle is a KLINGER idea. One ofmany ideas which has achieved world-wide recognition.Continuously modified and matched to modern requirement, thepiston Valve has provided itself by the millions throughout theworld. Today we can say with pride that our group is worldslargest manufacturer of valves, based on this design principle.KLINGER Piston valve performance is backed by central R & Dof KLINGER at Switzerland.The shut off assembly comprises of a stainless steel piston, tworesilient valve rings and a ferrous metal lantern bush. The sealingconsists of the cylindrical surface of the piston and thecorresponding inner surface area of the sealing rings. Thisprovides a very large sealing compared with globe valves withconventional design- one of the reasons for the Piston valvesexcellent seal.The valve Rings are the heart of the piston valve. They aremade from KXGT, a material specially developed andexclusively used for the manufacture of valve ring. KXGTconsists essentially of asbestos, a high quality elastomer andgraphite. KLINGER valve rings are not merely surface graphited;the graphite content extends throughout the ring. For this reasonits outstanding self lubricating properties are retained throughoutthe rings entire service life. KLINGER valve rings are resilient,accurately dimensioned and in consequence of their goodrecovery characteristics have excellent form retention and longservice life. KLINGER valve rings are resistant to water, steam,oils, solvents and wide range of other media. KLINGER valverings can be used for more than 230 listed fluid media.FEATURES:- Seatless and Gland less valve. Economic, easy to service. No erosion of sealing surface. Saves Energy, environment friendly. Maintenance free. Compensation for thermal expansion with use ofBelleville washer. Leak-tight across ports and to atmosphere.MATERIAL OF CONSTRUCTION:-ASTM A216 Gr. WCBASTM A351 Gr.CF8M (On Request )APPLICATIONS:-Steam, Thermic fluids, Acids, Gases, vacuum and other criticalmedia.Piston ValveKVN 65- 200ON REQUEST:-IBR/Non-IBRMOC : Cast Stainless / Alloy SteelValve with extended spindle.Valve with Heating JacketPneumatic / Electrical ActuatorAVAILABLE SIZES:-65,80,100,125,150,200 NB[65NB and 125 NB NB available in DINOverall length only]INSTALLATION:-Preferred direction is as per arrow,however this valve is a Bi DirectionalValve. This valve can be installed in anyposition without any adverse effect onperformance, seal ability or flow.Due to soft sealing principle it is advisableto install a strainer upstream of the valve toavoid damage to the rings caused by weldslag, metal and other solid impurities.Other Details:
Klinger Piston Valve is basically Seat less and Glandless valve and by virtue of its design can replace both, the conventional type of Gate and Globe valves, with distinct advantages over them. The Klinger Piston valve works on the principle of Resilient rings in conjunction with a Metallic Stainless Steel Piston, that moves vertically between the rings, giving a Seal that is both effective as well as Durable. This sealing system gives a bubble tight shut off, equivalent if not superior to Class VI leak standards.The Sealing rings are the heart of the valves, are available in Non Asbestos, Tanged Graphite, and Graphite Asbestos varieties, to effectively handle more than 250 Industrial Media.
UKL piston valves are ideally recommended for critical and hazardous media, including Steam, Heat Transfer Oils, Acids, Gases, VACUUM.

Product Details:

Other Details:

The enthalpy in the steam basically has two components : The Latent heat and the Sensible heat. Whereas condensate has only sensible heat. This condensate has to be removed as soon as it is formed, because it hinders to efficient heat transfer as well as leads to water hammer phenomenon as it is hot water (having more Specific Gravity) that moves with high velocity of steam (8 to 10 times higher than water), carrying enough momentum to rupture pipes and which is damaging to the plant pipelines as well as piping equipments. Hence, need to remove condensate from steam main and trap steam. This is done by steam trap.

UKL Ball Float Trap discharge condensate near to steam saturation temperature, which works on the principle of Buoyancy, [densities difference of Water and Steam].The rising condensate level elevates the Float open the valve and discharges the condensate. When the level of condensate drops, valve close the trap.

It is commonly used for most process heating applications. Wherever steam is used for indirect heating application, the trap to be used must be of mechanical design. It is a continuous discharge type steam trap. This trap can handle very high condensate loads and the discharge will be proportional to the differential pressure across the trap. There may be other similar process applications where the heat load is small and a mechanical trap can handle small as well as fluctuating loads.

This trap is provided with two optional features called Steam Lock release (SLR) and Thermostatic Vent (TV). The SLR is a manual operation to release steam that may hamper free movement of the float on water level. The TV will ensure that air and such un dissolved gases will be automatically vented out when present in condensate.

Product Details:

Other Details:

• The enthalpy in the steam basically has two components. The Latent heat and the Sensible heat. Whereas condensate has only sensible heat. This condensate has to be removed as soon as it is formed, because it hinders to efficient heat transfer as well as leads to water hammer phenomenon as it is hot water (having more Specific Gravity) that moves with high velocity of steam (8 to 10 times higher than water), carrying enough momentum to rupture pipes and which is damaging to the plant pipelines as well as piping equipments. Hence, need to remove condensate from steam main and trap steam. This is done by steam trap.
• The thermodynamic traps separate condensate and steam based on velocity which in case of steam is higher than that of condensate. These are used mainly on drip lines of the main steam distribution line, platen presses and super heated steam lines to remove condensate.
• Condensate pressure is used to open the trap by lifting the disc, discharging condensate in low pressure. Due to low pressure flashing of condensate takes place. High flash steam velocity (approximately 5 times of condensate) creates a low pressure zone below the disc. Accumulated flash steam force over the disc becomes greater than the incoming condensate pressure this leads to closure of the disc. Subsequently the flash steam condenses and the incoming higher pressure condensate pushes the disc opening the trap and thus the cycle continues.